Here is a sample powershell script for creating policy and associating it with the connection. Now that the VPN gateway, local gateway and connection are created, you will need to create IKE2 and IPsec policy and associate it with the connection. IKE Protocol : IKEv2 Create IKEv2 and IPsec policy for the connection Shared key (PSK): Arbitrary key (do not use easy psk like this example!) Local network gateway: Your local vpn gateway created in the previous step Virtual network Gateway: your Vnet gateway created in the previous step At the top of the Connections page, click +Add to open the Add connection page and configure the values for the connection. On the page for the gateway, click Connections. In this example, “Gateway_labVirtualNetwork” is my gateway. In the search bar, type the name of the gateway resource created in the previous steps. Create VPN connectionĬreate the Site-to-Site VPN connection between your virtual network gateway and your on-premises VPN device. If you have multiple subnets inside of your network, you can enter additional subnet in “Add additional address range”. Address space is your on-prem LAN subnet. For the IP address, type your on-prem VPN device’s public IP address. In the search bar, type “ local network gateways” to create a local network gateways. You give the site a name by which Azure can refer to it, then specify the IP address of the on-premises VPN device to which you will create a connection, in my case this is a Cisco router. The local network gateway typically refers to your on-premises location. The Public IP address will be automatically assigned after this virtual network gateway is created. I think you can do /29 or /30 as well if you do not require more than 4 IP addresses. For the Gateway subnet, I just followed Microsoft recommendation which is subnet /27 or /28. The important configuration here is Gateway type as “ VPN“, VPN type as “ Route-based” and the Public IP address as “ Create New“. On the basic tab, fill in all the values for your virtual network gateway. In the search bar, type “virtual network gateway” to create virtual network gateway. The gateway subnet is part of the virtual network IP address range that you specify when configuring your virtual network. The virtual network gateway uses specific subnet called the gateway subnet. Once you click Review + create, this screen shows up. I have created a new subnet “labSubnet_81” with the address range 10.0.81.0/24 here. On the IP addresses tab, you can use the default subnet or you can create a new subnet.
AZURE CREATE SITE TO SITE VPN TRIAL
I am using the free trial subscription now and just created “tayam-lab” resource group in this page. On the Basic tab, configure the required field. Select Virtual network from the Marketplace results. in Search resources, type “ virtual network“. If you do not have your Vnet set up yet, let’s create one. I just put a random IP addresses for WAN interfaces as I do not get my dev network attacked by anyone 🙂 Create virtual network This is the network diagram that I am going to use for this post. Create IKEv2 and IPsec policy for the connection.If you are looking for ASA Route-based VPN configuration, check out my another post 🙂 Today I am going to set up Azure site-to-site VPN to connect my on-premise lab network to Azure virtual network.
0 kommentar(er)
